ZONARE Z.one Ultra SP, Руководство по обслуживанию, Страница: 51 / 244

Q00180 Rev B
Page 51 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
Figure 28: Battery Pack Installation
5.6.3 Docking Scanner onto SmartCart SP
STEPS:
1.
Place the Scan Engine (or Scan Module) in the molded area on the docking plate, so that it will
align itself in the cradle.
2.
Gently pull the unit towards you until you hear a clicking sound from the release lever securing
the system into place.
Figure 29: Scanner Docking in SmartCart SP
WARNING
To maintain the integrity of the electronic equipment within the
Z.ONEULTRA SP
, it is critically
important that a specific sequence be followed at all times, for turning ON or OFF system
power. The sequences listed below should always be followed.
5.6.4 Powering-ON the
Z.ONEULTRA SP
5.6.4.1 SmartCart SP Power-ON
STEPS:
1.
Make sure the AC Main Circuit Breaker on the SmartCart SP is in the “ 1 ” ( ON , pushed in on
the LEFT) position (see illustration below).