ZONARE Z.one Ultra SP, Руководство по обслуживанию, Страница: 184 / 244

Q00180 Rev B Page 184 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
Socket Wrench Set, (10mm, 13mm) Multi-sizes 1 set SmartCart SP gas spring (13mm)
Combination Wrench Set (Metric) 19mm 1 miscellaneous
Allen Wrench Set (Metric) 2.5mm, 5mm 1 SmartCart SP gas spring
Flashlight, Mini-Mag 6” size 1 Illuminating tight access areas
Magnetic pick-up tool Telescoping 1 Retrieval of hardware
20.3 Hardware Service/Replacement Procedures (SmartCart SP)
20.3.1 Casters - Removal/Replacement (SmartCart SP)
Required Parts
•
P/N: 32865-00 ..............Caster, 5 Inch, Dual Wheel, Directional/Brake Lock (Front)
•
P/N: 32867-00 ..............Caster, 5 Inch, Dual Wheel, Full Swivel (Rear)
Required Tools/Equipment
•
Medium-tip flatblade screwdriver
Overview of Procedure
•
Remove Caster
•
Set Brake and/or Swivel Lock position
•
Install Caster
Removal of the Caster:
STEPS:
1. Ensure the
Z.ONEULTRA SP
is powered “OFF”.
2.
Place AC circuit breaker, located at the rear of the SmartCart SP, in the “
0
” (Off) position
.
3. Disconnect the main AC power cord from the rear of the SmartCart SP.
4. Undock the scan engine from the Cart, and set aside.
5. Fold the LCD display screen down to a horizontal position, for protection from moving during
tilting of Cart.
6. Lock the brake mechanism (front wheels) to keep the Cart from rolling.