manualshive.com logo in svg

ZONARE Z.one Ultra SP, Руководство по обслуживанию, Страница: 232 / 244

Поделиться
Скачать
ZONARE Z.one Ultra SP Скачать руководство пользователя страница 232

 

Q00180  Rev B 

Page 232 of 244 

"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"

 

 

4.

 

Press the power button on the Scanner Deck to energize the SmartCart SP, and allow it to fully 
boot. 

5.

 

Attach a transducer (if not already connected), and ensure basic imaging operation. 

6.

 

Insert a blank DVD or CD (

type

 as discussed in Note at top of this section) disk (label facing up) 

into the drive.  After 3-4 seconds a green disk icon will appear on the top left corner of the cart 
display. 

7.

 

Go to system archive and export study to the CD.  Upon completion, the disk will automatically be 
ejected. 

8.

 

Verification is complete – return system to normal operation. 

 

 

Содержание Z.one Ultra SP





















































































































































































































































Отзывы:

Нет отзывов