Safety Instructions
To enable you to use the system safely and correctly, please read
these instructions carefully before operating the machine
1.
When using the new program for the actual machining parts, do not directly processed, you should
make a trial run to verify the correctness of the mechanical movement of the machine, using
single-stage feed
without tools and parts. Carrying out the program without confirming its correctness, there may be unexpected
mechanical movement, resulting in the tool, machine tool, workpiece damage and personal injury.
2.
The operation should be carried out in full recognition of the correctness of the input data and then. If
the data used is not correct, there may be unexpected mechanical movement, resulting in the tool, machine tool,
workpiece damage and personal injury.
3.
Confirm the setting spindle speed and feed rate appropriate. Set the maximum spindle speed and feed
rate via user parameters. If the spindle speed and feed rate setting is not appropriate. It may result in tools,
machine tool, workpiece damage and personal injury.
4.
When using a tool compensation function, should be fully recognized compensation direction and
compensation amount. If the data used is not correct, there may be unexpected mechanical movement, resulting in
the tool, machine tool, workpiece damage and personal injury.
5.
The system parameters should be set appropriate values. The parameter values must be modified on the
basis of fully understanding of the meaning of the parameters. If the parameter setting error, it may result in
cutting tools, machine tool, workpiece damage and personal injury.
6.
Some features are in the machine tool manufacturer's requirements to achieve, when using these
functions, refer to the instructions provided by the machine manufacturer for detailed usage and understand the
function of some of the relevant considerations.
。
7.
Programmers should be familiar with and fully understand the contents of the operating instructions. In
setting the coordinate system, non-linear interpolation positioning, face constant speed control programming, you
must set the appropriate command values to ensure proper operation of the machine, in order to avoid cutting
tools, machine tool, workpiece damage and personal injury.
8.
Manually operating the machine movement need to master position of the tool and the workpiece, to
confirm the selection movement axis, direction of movement and other aspects of the feed rate. If you make a
mistake, it is possible to make tools, machine tool, workpiece damage and personal injury.
9.
For the machine requires manual machine zero, the machine must be manually returned zero after the
power is turned on. Otherwise, there will be unexpected machine operation, it is possible to make tools, machine
tool, workpiece damage and personal injury.
10. When using the manual handle feed, if select 100 magnification, tools, workstations and other
movement speed becomes faster, so special attention should be. Otherwise, it is possible to make tools, machine
tool, workpiece damage and personal injury.
11. ConFig.d parameter file should be back up for future recovery.
12. CNC system must be connected to ground.
