92
Fig.8-3 Interface of The Program List
3. Type the address O and the program number retrieved;
4. Click soft key [SRH] or the up or down keys to retrieve;
5. The program called out will be selected and highlighted at the end of retrieval.
NOTE:
The selected program number will be showed at the top right corner only after the soft key [READ] is
Clicked.
8.2.2 Scanning Method
1. Choose the [EDIT] mode;
2. Click the soft key [LIST] and the interface of the program list will be showed;
3. Click the arrow keys or the page down key;
4. When the mode is [EDIT], click the up and down arrow keys continuedly, then the saved programs will
show out one by one.
8.3 Program Deletion
8.3.1 The Deletion of the Programs in Memory
1. Choose the
[
EDIT] mode;
2. Click the soft key [LIST] and the interface of the program list will be showed;
3. Retrieve or choose the program that will be deleted, and click the soft key [DELETE].
CAUTION:
This operation is not reversible, so do the backup of the programs before they are deleted to prevent the lost
of important data.
The current program that the system is reading cannot be deleted.
8.3.2 The Deletion of the Programs in the U Disk
1. Choose the [EDIT] mode;
2. Click the soft key [U Disk];