59
5
Cursor move keys
↓ ↑ ← →
：
With the field as a unit, the keys can move the cursor in
downward, upward, leftward and rightward direction.
HOME END
：
When the program is edited, the keys can make the cursor
jump to the start or end of the current edit line.
6
Page change keys
: This key is used to changeover the page on the screen in the
reverse direction (the previous page).
：
This key is used to changeover the page on the screen in the
forward direction (the next page).
7
INSERT, DELETE, ALTER
keys
Press these keys when editing the program, include insert, delete and
replace operation.
8
Function keys
Press these keys to switch display screens for each function.
1.2.3 Soft Key Area
The system has eight soft keys, which are return to the previous level, F1, F2, F3, F4, F5, F6 and the
extended key. And the F1-F6 function keys correspond to the six different function keys of each MDI panel
screen.
1.2.4 Operation Panel Area
The operation panel of this CNC system:
Fig. 1-3
Table 1-2
Keys
Function Explanation
Press this key to enter the Edit mode. The system will stop immediately in the current
working block when the operation mode changed from Auto or MDI to Edit.
Press this key to enter the Auto mode, and the system can run the program in the internal
memory.
