77
Fig
.3-18
Parameter Display
3.13.2 Parametric Modification
It need to enter a password to obtain the appropriate operating authority before changing parameters, the
specific steps can be seen in the ‘password modification’.
1.
Bit Parameter can be modified directly by pressing soft button [NO:1]/[NO:0];
2.
Other parameters can be modified by pressing soft button [INPUT]or button[INPUT]in MDI panel after
input the parameter values.
3.
Reboot the system with prompting when the input is completed.
3.14 Pitch Error Compensation Display and Setting
3.14.1 Pitch Error Compensation Screen
1.
Press the function key [SYSTEM]to enter the system parameters screen in the edit stopped mode.
2.
Press the soft[PITCH]
，
the pitch error compensation screen appears.
3.
By using the page keys and cursor keys[←]
、
[
→
]
、
[
↑
]
、
[
↓
]to move the cursor ; Press the soft key
[(OPRT)]
→
[SRH] to finish quick positioning.
4.
Press [BWD] or [FWD] key to set pitch error compensation of each motor.
