67
3.2.2 Integrated Coordinate Display
Fig. 3-5 the Integrated Coordinate Interface
The integrated position coordinates interface displays the absolute coordinate, relative coordinate, machine
coordinate and the residual amount of movement (in Automatic and MDI modes) at the display area of the same
page.
The relative coordinate can be set by the soft key [(OPRT)] as shown in the following Fig..
Single axis relative coordinate clear: In relative coordinates interface, press [(OPRT)] soft key and then the X,
Y or Z key. The corresponding axis is selected and highlighted and its relative coordinate will be cleared by
pressing the soft key [ORIGIN].
All axes relative coordinate clear: All the relative coordinates will be set to 0 by pressing the soft key
[ALL-AX].
Relative coordinates setting: Set the relative coordinates of each axis. For example: input X20, press [SET],
the relative coordinate of X-axis changed to 20.
Taking the middle point: The CNC system displays half of the relative coordinate value of this axis after
execution of the [HALF].
Workpiece Count Cleared: Clear the number of the workpiece count. User level privilege required.
