60
Press this key to enter the MDI mode. The system will stop immediately in the current
working block when the operation mode changed from Auto to MDI.
Press this key to enter the DNC mode. The system will stop immediately in the current
working block when the operation mode changed from Auto to DNC.
Press this key to switch the program running mode between Single Block mode and
Continuous mode in Auto, MDI and DNC modes.
Press this key to apply Dry Run in Auto, MDI and DNC modes.
The key is the Optional Block Skip switch. When the switch is valid, the system will skip
the paragraph, which beginning with “/”, and continue running.
Press this key to make the axis motion output invalid in Auto, MDI, DNC, Jog and
Handwheel modes.
Press this key to make the M, S and T function output invalid in Auto, MDI and DNC
modes.
Press this key to enter the Handwheel mode. The optional rates are X1, X10 and X100.
Press this key to return to the reference point automatic.
Press this key to pause the running program in Auto, MDI and DNC modes.
Press this key to start the program in Auto, MDI and DNC modes.
2. Power ON/OFF and Safety Functions
2.1 Power ON
Before power on this system, the following situation must be checked and confirmed:
1.
The CNC machine tool is normal.
2.
The supply voltages of the system and the external signal are meeting the requirements.
3.
The wiring of system power supply lines, signal lines, and the other lines is correct and firm.
The system will display the actual position interface when the self-test is normal and the initialization is
complete as shown in Fig. 2-1.
