York OPTIVIEW YD Series Скачать руководство пользователя

Страница: 84 / 160

JOHNSON CONTROLS

FORM 160.79-O3

ISSUE DATE: 11/09/2018

SECTION 2 – OPTIVIEW CONTROL CENTER

This feature provides an indication when the compres-

sor motor lubrication is required. The lubrication re-

quirement and notification is based on the “Operating

Hours Since Last Motor Lubrication”. The greater of

either Motor Operating Hours #1 or Motor Operat-

ing Hours #2 is used for this value. There are up to

three levels of notification, each indicating an increas-

ing level of urgency. “Warning – Motor Bearing Lube

Suggested” is displayed when the hours exceed 1000

hours. If there is no response, “Warning – Motor Bear-

ing Lube Required” is displayed when the hours ex-

ceed 1200 hours. If there is still no response, a safety

shutdown is performed when the hours exceed 1400

hours and “Motor – Lack of Bearing Lubrication” is

displayed. See the

Display Messages

section of this

document for details of these messages.
To provide a record of when a motor lubrication is

performed, the Operator enters his/her initials, name

or user ID using the Motor Lube Acknowledge key.

This entry implies both motors were lubricated. The

date and time of this entry is automatically logged as

the Date of Last Lubrication and Time of Last Lubrica-

tion. This also clears any motor lubrication warning or

safety that is in effect and resets the Operating Hours

Since Last Lubrication to zero.

DISPLAY ONLY
Date of Last Motor Lubrication Warning or

Fault

Displays the date of the last motor lubrication warning

or safety shutdown.

Date of Last Motor Lubrication

Displays the date of the last motor lubrication. This pa-

rameter is automatically recorded when the Operator

enters his/her initials, name or user ID using the Motor

Lube Acknowledge key.

Time of Last Motor Lubrication

Displays the time of the last motor lubrication. This

parameter is automatically recorded when the Operator

enters his/her initials, name or user ID using the Motor

Lube Acknowledge key.

Operator Initials at Last Motor Lubrication

Displays the initials, name or user ID entered by the

Operator when both motors have been lubricated. En-

tered as a 3 to 8 character string using the Motor Lube

Acknowledge key.

MOTOR LUBRICATION SCREEN

FIGURE 29 -

MOTOR LUBRICATION SCREEN

LD27868

Содержание OPTIVIEW YD Series

































































































































































Результаты поиска

Содержание OPTIVIEW YD Series

Отзывы:

Похожие инструкции для OPTIVIEW YD Series

Бренды по названию

Популярные бренды

York OPTIVIEW YD Series, Руководство пользователя

Результаты поиска

Содержание OPTIVIEW YD Series

Отзывы:

Похожие инструкции для OPTIVIEW YD Series

Бренды по названию

Популярные бренды