York OPTIVIEW YD Series Скачать руководство пользователя

Страница: 27 / 160

JOHNSON CONTROLS

SECTION 2 – OPTIVIEW CONTROL CENTER

FORM 160.79-O3

ISSUE DATE: 11/09/2018

Pressing the

key, sets the entry value to the de-

fault for that setpoint. Pressing the

key, clears

the present entry. The



key is a backspace key

and causes the entry point to move back one space.

If the dialog box begins with “SELECT”, use the



and



keys to select the desired value.

If the previously defined setpoint is desired, press

the ‘X’ (Cancel) key to dismiss the dialog box.

3. Press the ‘

’ (Enter) key.

If the value is within range, it is accepted and the

dialog box disappears. The chiller will begin to

operate based on the new programmed value. If

out of range, the value will not be accepted and the

user is prompted to try again.

Manual Controls

Some keys are used to perform manual control func-

tions. These may involve manual control of items such

as the pre-rotation vanes, variable orifice or oil pump

speed. Other keys in this category are used to initiate/

terminate processes such as calibrations or reports.

Free Cursor

On screens containing many setpoints, a specific “soft”

key may not be assigned to each setpoint value. A soft

key will be assigned to enable the cursor arrow keys

below the numeric keypad which are used to “high-

light” the desired setpoint field. At this point, the ‘3’

key is pressed to bring up a dialog prompting the user

to enter a new setpoint value. The ‘X’ key cancels cur-

sor mode.

Navigation

In order to maximize the amount of values which the

panel can display to the user, and in order to place those

values in context, multiple screens have been designed

to describe the chiller operation. In order to move from

one screen to the next, navigation keys have been de-

fined. These keys allow the user to either move “for-

ward” to a subscreen of the present screen, or move

“backward” to the previous screen. Except for the

Home Screen display, the upper-right “soft” key will

always return the user to the Home Screen. Navigating

with “soft” keys is as simple as pressing the key next

to the label containing the name of the desired screen.

The system will immediately refresh the display with

the graphics for that screen. Following is a layout of all

the screens and how they are connected.

Содержание OPTIVIEW YD Series

































































































































































Результаты поиска

Содержание OPTIVIEW YD Series

Отзывы:

Похожие инструкции для OPTIVIEW YD Series

Бренды по названию

Популярные бренды

York OPTIVIEW YD Series, Руководство пользователя

Результаты поиска

Содержание OPTIVIEW YD Series

Отзывы:

Похожие инструкции для OPTIVIEW YD Series

Бренды по названию

Популярные бренды