Yamaha RCX222, Руководство пользователя

Страница: 134 / 524

4-36
Chapter
4
OPERA
TION
4-37
9. "AUTO" mode
• When the program "_SELECT" exists:
1) Press (RESET) in "AUTO" mode.
The following message appears on the guideline when "_SELECT" exists among
the programs. Press (YES) to reset the selected program by switching it to
"_SELECT", or press (NO) to just reset the current program.
■
Program reset (3)
AUTO [T1] 50% <TEST1 >
1 *ST:
2 MOVE P, P0
3 MOVE P, P1
4 MOVE P, P2
5 GOTO *ST
Change to _SELECT OK?
YES NO
2) When (NO) is pressed in Step 1), the following message then appears on the
guideline.
Press (YES) to reset the current program, or press (NO) to cancel the
reset.
■
Program reset (4)
AUTO
[T1] 50% <TEST1 >
1 *ST:
2 MOVE P, P0
3 MOVE P, P1
4 MOVE P, P2
5 GOTO *ST
Reset program OK?
YES NO
n
NOTE
The output is also reset when the program is reset. However, the output will
not be reset in the following cases:
1. “DO cond. on PGM reset / RESCDO” in Other parameters is set to “HOLD”.
(For details, see “13. DO cond. on PGM reset / RESCDO” in “12.1.4 Other
parameters”.)
2. A sequence program is being executed without enabling the DO reset in
the sequence execution flag setting.