Yamaha RCX222, Руководство пользователя

Страница: 264 / 524

4-166
Chapter
4
OPERA
TION
4-167
12. "SYSTEM" mode
1. Accel coefficient [%] /ACCEL
This parameter sets acceleration in "AUTO" mode in a range from 1 to 100% during
movement by robot movement command. This is automatically set to 100% when the
parameters are initialized. If the tip weight (workpiece tool weight) is set
correctly, then the actual acceleration is internally set in the control to be 100% at
maximum performance.
n
NOTE
If the robot arm tip shakes or sways during acceleration, lower this value to
suppress the shaking.
c
CAUTION
Lowering the acceleration coefficient lengthens the time needed to stop,
when was pressed or an interlock was triggered. Do not use a
drastically lowered acceleration coefficient.
[Procedure]
1) Select "1.Accel coefficient [%]" in "SYSTEM>PARAM>AXIS" mode.
2) Press (EDIT).
3) Select the axis with the cursor (
↑
/
↓
) keys.
■
Setting the "Accel coefficient [%]"
SYSTEM >PARAM>AXIS V9.00
1.Accel coefficient[%]
M1= 100 M2= 100
[1-100] Enter >_
100
4) Enter the value with to and then press .
5) Repeat the above steps 3) and 4) if necessary.
6) Press to quit the edit mode.