Yamaha RCX222, Руководство пользователя

Страница: 20 / 524

Safety Instructions
S-6
Warming label 8 (controllers RCX240, controllers RCX340)
■
w
WARNING
These are precautions for YAMAHA and distributors' service personnel.
Customers must not attempt to open the covers.
w
WARNING
Wait at least 100 seconds after power-off before opening the covers.
Instructions on this label
• Wait at least 100 seconds after power-off
before opening the covers (*).
• Some parts in the controller still retain a high
voltage even after power-off, so electrical
shock may occur if those parts are touched.
Potential hazard to human body Electrical shock
To avoid hazard Wait at least 100 seconds after power-off before opening the covers (*).
* These are precautions for YAMAHA and distributors' service personnel. Customers must not attempt to open the covers.
90K41-001390
Warning label 9 (single-axis linear motor robots)
■
c
CAUTION
A magnetic scale is located inside this cover. Bringing a magnet close to it may cause malfunction.
Instructions on this label
• To prevent the robot from operating improperly due
to magnetic scale malfunction, do not bring a strong
magnet to the cover.
• Do not bring tools close to the magnetic scale.
90K41-001510
Warning label 10 (single-axis linear motor robots)
■
c
CAUTION
Powerful magnets are installed in the robot.
Do not attempt to disassemble the robot to avoid possible injury.
Do not bring any device that may malfunction due to magnetic fields close to the robot.
Instructions on this label
Be sure to read "6. Cautions regarding strong magnetic
fields" in "Safety instructions" and make sure you fully
understand its contents before handling or operating
the robot.
Potential hazard to human body Injury or death may result in some cases.
To avoid hazard Make you understand the precautions regarding strong magnetic fields.
90K41-001500