Yamaha RCX222, Руководство пользователя

Страница: 281 / 524

4-182 4-183
Chapter
4
OPERA
TION
12. "SYSTEM" mode
16. Motor direction /MOTDIR
This parameter specifies the robot movement direction. When initialized, this is set
automatically according to the current robot model.
"---" ...... Motor minus (-) direction is set as the - direction.
"+++" .... Motor minus (-) direction is set as the + direction.
This parameter cannot be changed while the servo is on. To change the parameter,
make sure the servo is off.
n
NOTE
This parameter cannot be changed while servo is on.
c
CAUTION
• YAMAHA can accept no liability from problems arising due to changing
the axis polarity without consulting YAMAHA beforehand.
• Return-to-origin will be incomplete if this parameter is changed.
[Procedure]
1) Select "16. Motor direction" in "SYSTEM>PARAM>AXIS" mode.
2) Press (EDIT).
3) Select the axis with the cursor (
↑
/
↓
) keys.
■
Setting the "Motor direction"
SYSTEM >PARAM>AXIS V9.00
16.Motor direction
M1=––– M2=–––
––– +++
4) Press (---) or (+++).
5) Repeat the above steps 3) and 4) if necessary.
6) Press to quit the edit mode.