Yamaha RCX222, Руководство пользователя

Страница: 489 / 524

9-36 9-37
Chapter
9
TROUBLESHOOTING
14.21 : No return code (C/R)
Code : &H0E15
Meaning/Cause : 1. Character string in 1 line exceeded 75 letters.
2. CR code (0Dh) was not added at end of line.
Action : 1. Limit number of characters in 1 line to 75 letters.
2. Add a CR code at the end of a single line.
14.22 : No start code (@)
Code : &H0E16
Meaning/Cause : Starting code "@" was not added at beginning of single line in
an on-line command.
Action : Add starting code "@" at the beginning of on-line command.
14.23 : Illegal command,Operating
Code : &H0E17
Meaning/Cause : During data editing, an on-line command was executed.
Action : After completing data edit, execute an on-line command.
14.24 : Illegal command,Running
Code : &H0E18
Meaning/Cause : During program run, a non-executable on-line command was
attempted.
Action : After stopping the program, execute the on-line system
command which could not previously be executed.
14.25 : Illegal command in this mode
Code : &H0E19
Meaning/Cause : Cannot execute the specified online command in the current
mode.
Action : 1. Stop the online command.
2. Change the mode.
14.26 : Illegal command,SERVICE mode
Code : &H0E1A
Meaning/Cause : Unable to execute since operation is in "SERVICE" mode.
Action : 1. Cancel "SERVICE" mode.
2. Change the exclusive control setting so it can be used in
"SERVICE" mode.
14.31 : Illegal port type
Code : &H0E1F
Meaning/Cause : Communication port not specified.
Action : Contact our company with details on this problem.
[14] RS-232C communication errors