Yamaha RCX222, Руководство пользователя

Страница: 462 / 524

9-10
Chapter
9
TROUBLESHOOTING
9-11
[ 3] Program file operating errors
3.1 : Too many programs
Code : &H0301
Meaning/Cause : Making of a new program was attempted after number of
programs exceeded 100.
Action : Make a new program after deleting an unnecessary program.
(Make a backup if necessary.)
3.2 : Program already exists
Code : &H0302
Meaning/Cause : An attempt to make/copy/transmit (by using SEND command) a
new program with a name already registered was attempted.
Action : Making a new program/copy/transmission (by using SEND
command) using a new (unregistered) program name.
3.3 : Program doesn't exist
Code : &H0303
Meaning/Cause : A registered program of the specified name does not exist.
Action : Correctly enter a registered program name.
3.4 : Writing prohibited
Code : &H0304
Meaning/Cause : The specified program is write protected.
Action : Use a program that is not writ e protected.
3.5 : File type error
Code : &H0305
Meaning/Cause : Software error occurred.
Action : Contact our company with relevant information.
3.6 : Too many breakpoints
Code : &H0306
Meaning/Cause : Setting of break point exceeding 4 points was attempted.
Action : After deleting unnecessary break points, set the new break
point . (Up to 4 break points can be set in one program.)
3.7 : Breakpoint doesn't exist
Code : &H0307
Meaning/Cause : Break point was not found during search.
Action : Set a break point if needed.
3.9 : Cannot find strings
Code : &H0309
Meaning/Cause : Could not find specified character string during search.
Action : If needed change the character string and try searching again.
[ 3] Program file operating errors