XVision X100 Series, Руководство пользователя

Страница: 73 / 176

X100 Series Main User Manual 73
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FIG
U
RE
3.10 E-MAIL MENU
SETTING TAB
Use this menu to setup SMTP email parameters to enable email messages to be sent out as an ‘event
trigger’ for when the IP camera detects motion.
SMTP Server
Type the SMTP server name or the IP address of the SMTP server.
Test Button
Click TEST to send a test email to the mail server.
SMTP Port
:
Set port number of the SMTP service.
SMTP Authentication
Enable or disable the type of Authentication required when you send an email using the toggle
buttons.
Select DISABLE if no authentication is required when an email is sent.
Select ENABLE if authentication is required when an email is sent.
Authentication User Name & Password
Type the User Name and Password for the SMTP server if ‘SMTP Authentication’ is Enable.
E-mail To, From, Subject
:
Type the receiver’s email address, the sender’s email address (this address is used for reply emails)
and the subject/title of the email.
Click OK to confirm changed settings. Click Cancel to cancel any changes.