XVision X100 Series, Руководство пользователя

Страница: 34 / 176

34 X100 Series Main User Manual
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FI
G
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
INSTALLATION
1.
Attach Video lead from your analogue camera to the BNC Video Input
- Ensure the analogue camera is powered
2.
Connect the LAN cable and 12V DC Cable to the Video Server ( if using Power over Ethernet,
12V DC Power is not required ).
3.
The unit is now ready for you to setup and configure using your PC.
- See SETUP on page 36.
Power an External Camera
Use the Power Cable provided to connect the 12V DC Out Power Socket to power one external camera.
The output power is 12V DC 400mA maximum. This is optional.
Connect an external Microphone
Connect the 3.5 microphone Audio In Socket to an external Microphone or your camera’s Audio Output
for audio monitoring.
Connect an A/V device
Use the Audio/Video Output Cable to connect Audio/Video Out to a Monitor, DVR or similar device.
The white connection is for Audio, the yellow connection is for Video. The Audio output can be used to
connect to a speaker with an amplifier for voice alerting or for enabling the 2 Way Audio function.
Alarm and RS485 Connections
Grouping Pin Connect to:
ALARM
SENSOR
1 12V DC Power (50mA Max)
2 Alarm Sensor Input
3 GND
4 Alarm Output
RS485
(Connects to
RS485 on a
Zoom, Pan Tilt
Zoom or Speed
Dome Camera)
5 RS485 +
6 RS485 -
To Network
From analogue camera
To Mains Power (not
required if Power over
Ethernet being used)
VIDEO SERVER
1 2 3 4 5 6
1 2 3 4 5 6
IN
ST
A
LL
&
C
O
N
N
EC
T