XVision X100 Series, Руководство пользователя

Страница: 65 / 176

X100 Series Main User Manual 65
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FIG
U
RE
DATE AND TIME TAB
You can setup the camera to make it synchronized with PC or remote NTP server. You may select your
time zone in order to synchronize the time locally.
Server & PC Date & Time
Displays the date and time of the IP camera and connected PC respectively.
Adjust
Use the buttons to select the time and date adjustment
- Synchronize with PC: Click this option to enable time synchronization with PC time.
- Manual setting: Click this option to set time and date manually.
- Synchronize with NTP: Click this option if you want to synchronize the device’s date and time with those of time
server called NTP server (Network Time Protocol).
NTP Server
Type the host name or IP address or domain name of the NTP server.
NTP Sync. Interval
Select an time between 1 and 23 hours at which you want to adjust the camera’s time to the NTP server.
Time zone
Set the time difference from Greenwich Mean Time in the area where the camera is installed.
Daylight Saving
Enable or disable Daylight Saving mode using the toggle buttons. Set the Start and Stop time and offset
for your timezone.
Click OK to confirm changed settings. Click Cancel to cancel any changes.