XVision X100 Series, Руководство пользователя

Страница: 55 / 176

X100 Series Main User Manual 55
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FIG
U
RE
PPPoE TAB
What is PPPoE (Point to Point Protocol over Ethernet)?
PPPoE is a network protocol that allows data communication between two network points. It allows
the IP camera to connect to xDSL or cable broadband network directly and automatically assign itself a
dynamic IP address. For more details on PPPoE and Internet configuration, please consult your ISP.
The IP camera’s PPPoE information should be setup in a LAN environment to setup before connecting
to the xDSL modem. Once setup, power on the camera again and it will dial the ISP and connect to the
WAN through the xDSL modem.
The procedures are
• Connect to a LAN by DHCP or Fixed IP
• Access the device, enter Setting > Network > PPPoE as below:
PPPoE :
Enable or disable the PPPoE service using the toggle buttons.
User name & Password
:
Type the user name and password for the PPPoE service which is provided by the ISP.
IP address, Subnet mask, and Gateway (read only)
Shows the IP information from PPPoE server site.
Status
Shows the Status of PPPoE connection.