XVision X100 Series, Руководство пользователя

Страница: 67 / 176

X100 Series Main User Manual 67
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FIG
U
RE
4.
Click the BROWSE button. Select the Firmware binary file. (Make sure that the Firmware applies to
the camera, once updated, it will be burned into the FLASH ROM of the System.)
5.
Once the firmware file has been selected, click the FIRMWARE UPGRADE button.
6.
The upgrade progress information will be displayed. Once the uploading process completed, the
device will reboot the system automatically.
7.
Wait for the timer countdown, and then you can use the IPWizard II to search for the device again.
System Restart
Click on the RESTART button to restart the camera
without changing any of the network settings
. It
means the IP address of the device will not change after a firmware upgrade.
Click OK to confirm changed settings. Click Cancel to cancel any changes.
WARNING:
The download firmware procedure cannot be interrupted. If the power and/or network connection are broken
during the download procedure, it might possibly cause serious damage to the camera.
DO NOT upgrade firmware via Wireless LAN due to high error rate possibility
DO NOT allow any other users to access the camera during the update procedure.
DO NOT turn OFF the power during updating the firmware - wait for the ‘finish’ message.
DO NOT try to upgrade new firmware if it’s not necessary as it may cause serious damage to the camera if any
errors occur.