XVision X100 Series, Руководство пользователя

Страница: 22 / 176

22 X100 Series Main User Manual
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FI
G
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
Resetting your camera
The Reset Button is used to restore the factory default settings. If you are experiencing problems
with the IP camera, sometimes restarting the device will make the system revert back to a normal state.
To reset, hold the button for at least 5 seconds. The camera will restore factory settings & reboot.
Auto Iris Lens
Remember to calibrate the Auto Iris lens once the camera has been set up and configured on the
network.
- See AUTO IRIS on page 61.
IN
ST
A
LL
&
C
O
N
N
EC
T
Note: Failure to calibrate the Auto Iris lens will result in the picture becoming dark over time.
Note: Restoring the factory default setting will lose all the previous settings including the IP address.
You will need to run the IPWizard II program to re-configure the camera to enable it to work properly again.