50
X100 Series Main User Manual
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FI
G
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FI
G
U
RE
3.4 NETWORK MENU
NETWORK TAB
This section provides the menu for connecting the device through Ethernet cable.
MAC address
Displays the Ethernet MAC address of the device. (This cannot be changed).
Obtain IP address automatically (DHCP)
(Dynamic Host Configuration Protocol)
Check this box when a DHCP server is installed on the network to issue IP address assignment. With
this setting, the IP address is assigned automatically. If the camera can not get an IP address within
limited tries, the camera will assign a default IP address (192.168.0.100) itself as the default IP
address.
IP address, Subnet Mask, and Gateway
:
If you do not select ‘Obtain an IP address automatically’, then you need to enter these network
parameters manually.
Obtain DNS
(Domain Name System)
from DHCP
:
Check this box when a DHCP server is installed on the network and provides a DNS service.
Primary DNS and Secondary DNS
If you do not select ‘Obtain DNS from DHCP’, then you need to enter these parameters manually.
HTTP Port
The device supports two HTTP ports. The first one is default port 80 which is fixed (useful for Intranet
usage). The second HTTP port is changeable. You can assign the second port number of the http
protocol, and WAN users should follow the port number to login. If the http port is not assigned as
80, users have to add the port number to the end of the IP address.
- For example: http://192.168.0.100:8080.
- Therefore, the user can access the device by either typing in:
Содержание X100 Series
Страница 1: ...User Manual X100 SERIES ...
Страница 176: ...V1 2 2010 10 ...