XVision X100 Series, Руководство пользователя

Страница: 52 / 176

52 X100 Series Main User Manual
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FI
G
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FI
G
U
RE
2.
Select your security mode (WEP or WPA). Then click the SUBMIT button to activate the settings.
To configure the Wireless Settings manually use the following fields:
MAC address
Displays the Ethernet MAC address of the WLAN card. This cannot be changed.
Interface Select
Choose WIRED (ETHERNET) ONLY or AUTO - WIRED IF CABLE CONNECTED, OTHERWISE WIRELESS.
Note that wired connection will take priority.
Type
Select a WLAN mode, either from INFRASTRUCTURE or AD-HOC mode.
SSID (Service Set Identifier)
This is the name of the wireless network the camera is configured for. The field accepts up to 32
alphanumeric characters. The name must be exactly the same as that used in the wireless access point,
or the connection will not be established. Leaving this field blank means the camera will attempt to
access the nearest open network.
Use the TEST
button to test the
wireless settings
before saving any
changes.