XVision X100 Series, Руководство пользователя

Страница: 53 / 176

X100 Series Main User Manual 53
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FIG
U
RE
BSSID (Basic Service Set Identifier)
Related to SSID, BSSID refers to the MAC address of the Station (STA) in an Access Point (AP).
Channel
Chooses the wireless channel in the wireless network.
Security mode
Select which type of security the network uses. The device supports three security methods: NONE,
WEP or WPA_PSK/WPA2_PSK. You will need to know your wireless network security settings to
complete this section.
Obtain IP address automatically (DHCP)
Check this box when a DHCP server is installed on the network to assign an IP address to your camera.
With this setting, the IP address is assigned automatically.
IP address, Subnet mask, and Gateway
If you do not select ‘Obtain an IP address automatically’, then you need to enter these network parameters
manually.
Use the TEST button to test the wireless settings before saving any changes.
To save your settings, select OK. To cancel any changes, click the CANCEL button.
DDNS TAB
What is DDNS (Dynamic Domain Name Server)?
Your Internet Service Provider (ISP) provides you at least one IP address which you use to connect to the
Internet. The address you get may be static, meaning it never changes, or dynamic, meaning it’s likely to
change periodically. Just how often it changes, depends on your ISP.
A Dynamic IP address complicates remote access since you may not know what your current WAN IP
address is when you want to access your device over the Internet. One of the possible solutions to the
dynamic IP address problem comes in the form of a dynamic DNS service.
A dynamic DNS service is unique because it provides a means of updating your IP address so that your
listing will remain current when your IP address changes.
This allows you to view your IP camera
using a simple web address like http://mycamera.dyndns.org/, instead of a meaningless, ever-
changing IP address like http://123.45.67.89
There are several excellent DDNS services available on the Internet. One such service you can use is
Note:
To enable the WLAN function, you must set the related parameters correctly first, then power off the
camera and remove the Ethernet cable. When the camera is turned on again the WLAN mode will be available.