XVision X100 Series, Руководство пользователя

Страница: 113 / 176

X100 Series Main User Manual 113
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
Motion Config
Select the type of recording you want the schedule to follow during the set time period.
- The MOTION DETECT AREA buttons should be used to set the areas in which the Motion Detection recording should
cover. The active motion detection area will be represented by areas overlaid in a red colour. Areas that are not
covered by motion detection will be left as normal.
- DEFAULT BUTTON: Click this button to select the full image area for motion detection coverage.
- ADD BUTTON: Click this button to enable areas to be added to the motion detection area. After clicking the button,
select areas by dragging a rectangular area over the image. Selected areas will be added.
- DELETE BUTTON: Click this button to disable areas and remove them from the motion detection area. After clicking
the button, deselect areas by dragging a rectangular area over the image. These areas will be removed.
- SENSITIVITY: Set the sensitivity level of Motion Detection. 5 is the highest level motion detection sensitivity, 1 is the
lowest level of motion detection sensitivity.
- MOTION INTERVAL: Set this value to define the interval of motion detection. If set to a longer value, the system will
use less CPU computing power to check motion detection.
- DISPLAY MOTION DETECTION STATUS: Ticking the box will enable the display of the area(s) where motion
detection is triggered. Theses will be represented by yellow rectangles within the active motion detection areas.
- PREVIEW WINDOW: Red area is the motion detection area. The other areas are non-motion detection region. The
yellow rectangles are triggered regions of motion detection areas.
DI (Alarm Input) Record Setting
When you select DI Recording Mode, select the DI input from the drop down box and select the DI
(Alarm Input) as OPEN or CLOSE to trigger recording.
Note:
Ensure you click the OK button after you have changed the Record Setup fields to save your settings. Click
CANCEL to close window without saving any changes.