XVision X100 Series, Руководство пользователя

Страница: 15 / 176

X100 Series Main User Manual 15
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
INSTALLATION
1.
Select a mounting position on a wall or ceiling. Rotate the dome housing anti-clockwise to remove
the camera from the mounting base.
2.
Use the mounting base to mark up screw positions and make a hole in the wall or ceiling to insert the
LAN cable and 12V DC Cable (
if using Power over Ethernet, 12V DC Power is not required ).
3.
Feed the cables through the hole.
4.
Use the screws and wall plugs supplied to fix the mounting base.
5.
Insert the cables through the side cable exit or from the rear of the camera.
Holes for
fixing base to
wall or ceiling
Holes for
fixing base to
wall or ceiling
Push cables through
the side cable exit
Push cables through
the side cable exit
To Network
Power Cable To Power Adaptor
To Network
Power Cable To Power Adaptor
CEILING MOUNT
WALL MOUNT
IN
ST
A
LL
&
C
O
N
N
EC
T