XVision X100 Series, Руководство пользователя

Страница: 32 / 176

32 X100 Series Main User Manual
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FI
G
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
4 CAMERA INSTALLATION
Lens Adjustment
Make any lens (focus) adjustments after you have
connected the camera and have setup live viewing via
your PC.
To adjust the lens, open the Dome Cover by turning it
anti-clockwise and rotate the Focus Ring.
For Audio
Connect the 3.5mm microphone Audio In Socket to an external Microphone for audio monitoring.
Connect the 3.5mm microphone Audio Out Socket to an audio output device such as a speaker with an
amplifier for voice alerting or for enabling the 2 Way Audio function.
Alarm and RS485 Connections
Grouping Cable Name (Colour) Connect to:
ALARM SENSOR
(Optional)
DI (Green/White) Alarm Sensor Input
DO (Orange/White) Alarm Output
12V DC (Brown/White)
Alarm Output Power
(12V DC 50mA Max)
GND (Blue/White)
Alarm Sensor Ground
RS485
RS485 + (Purple/White) Not Used
RS485 - (Grey)
Not Used
Resetting your camera
The Reset Button is used to restore the factory default settings. If you are experiencing problems
with the IP camera, sometimes restarting the device will make the system revert back to a normal state.
To reset, hold the button for at least 5 seconds. The camera will restore factory settings & reboot.
Note: Restoring the factory default setting will lose all the previous settings including the IP address.
You will need to run the IPWizard II program to re-configure the camera to enable it to work properly again.
Focus Ring
IN
ST
A
LL
&
C
O
N
N
EC
T