XVision X100 Series, Руководство пользователя

Страница: 57 / 176

X100 Series Main User Manual 57
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FIG
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
CO
N
FIG
U
RE
UPnP
Enable or disable the UPnP service using the toggle buttons.
Friendly Name
Shows the friendly name of this device here.
UPnP NAT Traversal
When enabled, the camera will attempt to configure port mapping in a NAT router on your network,
using UPnP™. Note that UPnP™ must be enabled in the NAT router first.
Port Range
The port range will open in NAT router.
External IP address
Shows the IP address and port for WAN access through Internet. If NAT traversal is configured
successfully, you can use this IP address and port to access the camera. The external IP address is not
shown in case NAT traversal function is failed.