XVision X100 Series, Руководство пользователя

Страница: 102 / 176

102 X100 Series Main User Manual
IN
ST
A
LL
&
C
O
N
N
EC
T
SE
TU
P
CO
N
FI
G
U
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
RE
CO
RD
IN
G
S
O
FT
W
A
RE
4.5.2 CAMERA TAB
Click on CAMERA Tab:
Camera Config
Setup the IP camera information using this section.
- VENDOR: Ensure ‘general’ is selected when adding an IP CAMERA.
- MODEL: Shows the Model name of the camera.
- CAMERA NAME: Set the channel’s camera name to identify the camera in system.
- IP: Set the IP address of the IP camera.
- PORT: Set HTTP port of the IP camera.
- USER: Set the User Name for this camera. This User Name must have the authority to login the specified camera.
- PASSWORD: Set the Password for this camera. This system will use the User name and Password to access the
camera images.
- ADD button: If you manually enter the IP cameras’s details, click the ADD button to assign it to the system.
X100 CAM1
Xvision
Configure detail
button
Click to access the
web page of the
selected camera.
Live preview image of
the selected camera
Search button
(See overleaf for
details)
Detect button
Will detect the IP details of
a camera (if the camera is
not located on the LAN)
Camera Parameter
button
(See overleaf for details)
Camera List
Lists all the camera(s)
installed in the system.
Tick each camera to
enable it.
Untick a camera to
disable it. (It will not
show up on the Main
Interface during live
viewing).
Select a camera to
configure its settings.
Camera Config.
(See below for details)
OSD Config
Select the information to be
displayed on the sub-screen(s)
during live viewing.
X100 CAM1