Xerox WorkCentre C226, Руководство пользователя, Страница: 291 / 440

Manually Setting the Scanning Size
Xerox WorkCentre C226 User Guide 4-35
3. Touch the desired original size key.
The original size key you touched are highlighted.
If you wish to select an inch size, touch the [INCH] key and then touch the desired
original size key.
[INCH] is highlighted and inch size keys are displayed.
To return to the AB palette, touch the [AB] key once
again.
If you wish to select a custom size, touch the [EXTRA SIZE] key and enter the size
of the original.
Touch the [X] key and use the or keys to set the
length in the X direction, and then touch the [Y] key and
do the same for the Y direction.
The length can be within the range 10 to 432 mm (1/2" to
17") in the X direction and 10 to 297 mm (1/2" to 11-5/8")
in the Y direction, set in increments of 1 mm (1/8").
Depending on the amount of memory installed, it may not be possible to scan
some original sizes (page 4-1).
4. Touch the outer [OK] key.
You will return to the initial screen.
Touching the inner [OK] key in the step above returns
you to step 2.
The selected size appears in the top half of the [ORIGINAL] key.
NOTE: You can return to automatic detection by pressing the [CLEAR ALL] key.
OK
OK
Inch Extra Size AB
Original Size
Manual Auto
B4 A3 A4 A4R
B5R A5 A5R B5
OK
OK
Inch Extra Size AB
Original Size
Manual Auto
5 X8 1
/
2
1
/
2
5 X8 R 1
/
2
1
/
2
8 X11 1
/
2
8 X11R 1
/
2
8 X13 1
/
2
8 X14 1
/
2
11X17
OK
OK
Inch Extra Size AB
Original Size
Manual Auto
210 X
297
(10 432)
mm
(10 297)
mm
Y
OK
OK
MANUAL
B5R B5
OK
OK
Manual
B5R B5
Original
Lower
Resolution
Programmed
File Format
A4