![background image](http://html2.mh-extra.com/html/xerox/workcentre-c226/workcentre-c226_user-manual_4284544093.webp)
Saddle Stitch Finisher
Xerox WorkCentre C226 User Guide
1-67
Misfeed in the Saddle Stitch Finisher
When a misfeed occurs in the Saddle Stitch Finisher, remove the misfed paper follow-
ing the procedure below.
1.
Unlatch the Saddle Stitch Finisher and slide it away from the main unit.
NOTE:
The Saddle Stitch Finisher and the machine are connected at the rear. Exercise
caution when pulling them apart.
2.
Remove the misfed paper from the main unit.
After removing the misfed paper, open and close the
Duplex Bypass/Inverter Unit to reset the jam indicator.
(“Misfeed in the transport area, fusing area, and exit
area” step 1 of “Fusing area” on page 1-50 or step 4 on
page 1-51.)
3.
If there was no misfed paper in step 2, pull roller rotating knob B on the punch unit
towards you and rotate it. (Only when an optional punch unit is installed.)
Rotating roller rotating knob B releases the caught
paper.
4.
Open the top cover.
Roller rotating
knob B
Содержание WorkCentre C226
