![background image](http://html2.mh-extra.com/html/xerox/workcentre-c226/workcentre-c226_user-manual_4284544096.webp)
1-70
Xerox WorkCentre C226 User Guide
General Information
15. Push the Saddle Stitch Finisher back against the main unit.
Troubleshooting Saddle Stitch Finisher problems
Check the list below before calling for service.
Problem
Check
Solution or cause
Stapling position is
not correct (includ-
ing saddle stitch).
Stapling position not set properly?
Check the stapling position setting. (See
pages 1-72 and 1-73.)
The Saddle Stitch
Finisher does not
operate.
Are any Saddle Stitch Finisher covers
open?
Close all covers. (See pages 1-68 and 1-
69.)
Message indicating need to remove
paper from the stapler compiler dis-
played?
Remove all remaining paper from the
stapler compiler referring to step 4 on
page 1-63.
Stapling cannot be
performed (includ-
ing saddle stitch).
Message to check the staple unit dis-
played?
Remove jammed staples. (See page 1-
63.)
Message to add staples displayed?
Replace the staple cartridge. (See
page 1-61.) Check that a staple cartridge
has been installed. (See page 1-61.)
Different size paper included?
Stapling cannot be performed onto differ-
ent size paper.
Is the paper badly curled, preventing sta-
pling?
Differences in paper quality and type
may result in bad curling of output paper.
Take the paper out of the tray or Bypass
Tray, turn it around, and reload it so that
the top and bottom edges are reversed.
The punch hole
positions are not
correct*
1
The punch function is not set to the cor-
rect punch positions.
Check the allowed hole punch positions.
Содержание WorkCentre C226
