Vonsch FOTO CONTROL Series, Конфигурация и диагностика

Страница: 78 / 97

RU , GSE, FOTO CONTROL, QUATROFREM v.2.53x
15. apríla 2019 Page 78 from 97
MENU \ SETTINGS \ FAULTS AND WARNINGS \ FAULT ACKNOWLEDGEMENT \ SPECIAL SETTING
Name [ID] Description Def.
Acknowledgement signal
[490]
Signal for fault acknowledgement.
[184] Binary
inputs
Signal
Acknowledgement [491]
Condition of fault acknowledgement.
Look choises of parameter's Binary inputs [184] (page 21)
Confirmation inactive
[492]
Confirmation inactive: In case of a numeric signal if the signal
value is lower than the defined level.
Look choises of parameter's Binary inputs [184] (page 21)
7.7.6 QUANTITIES TO LOG
Group of parameters number [287]
Selection of quantities, which should be logged to history when an event occurs (faults, warnings...).
MENU \ SETTINGS \ FAULTS AND WARNINGS \ QUANTITIES TO LOG
Name [ID] Description Def.
Value 1 [288]
Selection of the first optional quantity which will be logged to the
history. When an event occurs (fault), its actual value will be stored.
[184] Binary inputs
Signal
Value 2 [289]
Selection of the second optional quantity which will be logged to the
history. When an event occurs (fault), its actual value will be stored. [593] Inst.
production
Signal
Value 3 [290]
Selection of the third optional quantity which will be logged to the
history. When an event occurs (fault), its actual value will be stored.
[221] AC voltage
Signal
Do not log [671]
Determines if some faults will not be logged to the fault history. This
parameter does not influence the fault evaluation itself.
Undervoltage DC
■ Undervoltage
DC
Determines whether the fault " E5-DC undervoltage (page 32)" will not be logged to the
fault history.
□ Supply overload
Determines if the " E16-Supply overload (page 32)" fault will not be logged to the fault
history.
□ Safety input Fault " E14-Safety input (page 32)" will not be logged to the fault history.
□ Supply overl.
PWM off Fault " E16-Supply overload (page 32)" will not be logged to the fault history when the
PWM is off.
Par. changed
[987]
Allows creating the parameter changes history.
Control panel |
MODBUS
■ Control panel All parameter changes by control panel are recorded.
■ MODBUS All parameter changes over MODBUS are recorded.
□ PROFIBUS All parameter changes over PROFIBUS are recorded.
7.7.7 WARNINGS
Group of parameters number [837]
Setting the conditions of generating the individual warnings and their storing to the fault history.
MENU \ SETTINGS \ FAULTS AND WARNINGS \ WARNINGS
Name [ID] Description Def.
Warnings [646] Restricts the displayed warnings to the list of more important warnings. Basic
Basic Some warnings, which are not neccesary for basic users, will be suppressed.
Expert All available warnings and function messages will be displayed.
Cooler temperature
warning [699]
Temperature, at which the cooler displays a warning " W6-Cooler temperature
(page 29)". 75.0
°C
40.0 ÷ Error line
cooler temperature
7
If the temperature based power restriction is enabled in Power restriction (PR) [700]
(page 45), power is reduced when temperature is very high to suppress the
overheating of the inverter.
7
Refer to chapter 3.2 Temperatures (str. 13) by product type.
CB temperature Temperature, at which the inverter displays a Control board (CB) overheat 40.0