Vicon PILOT PLUS V1544, Инструкция по установке и эксплуатации

Страница: 115 / 142

3-74
|
Chapter 3 Configuration
XX200-00 Pilot Plus
shown, keypad 2 can control all monitors with the exception of monitors
2 and 6.
3. Click Apply to implement the changes.
Note: Clicking Apply will make the changes permanent. Clicking Restore will
cancel the changes that you have made and revert back to the original
values. Once you click Apply, you cannot restore the original values.
Camera Partitions
In the Video Switch Setup section, keypad grouping was described as a
method to limit operator control of PTZ functions during specified times.
Camera Partitions enable you to define which cameras will be included in the
groups by creating a partition number. Up to 16 partitions are available. In the
example shown, cameras 1-3 are part of Camera Partition #1. As part of this
partition group, viewing is permitted but pan/tilt/zoom functions are not
allowed. When this camera partition is chosen with a keypad group in the
Timed Events screen, these settings define that the keypads in the group
may view but not control the PTZ functions of cameras 1-3 during the defined
time and date.
To assign cameras to a partition, proceed as follows:
1. In the left column, click on a Camera Partition # and select a partition.