Vicon PILOT PLUS V1544, Инструкция по установке и эксплуатации

Страница: 119 / 142

3-78
|
Chapter 3 Configuration
XX200-00 Pilot Plus
Field Description
Stop Bits
(Host Port Only)
Selects the number a bits received that indicate the
data transmission has stopped. You can select 1 or
2 in accordance with your equipment's
requirements.
Data Bits
(Host Port Only)
Selects the number of bits used to represent one
character of data. You can select 7 or 8 in
accordance with your equipment's requirements.
Parity
(Host Port Only)
Selects Odd or Even parity. Select the parity based
on your equipment's requirements. None is also an
option.
Flow Control
(Host Port Only)
Selects either hardware or software control of data
transmission flow. Select data flow method based
on your equipment's requirements. None is also an
option.
All selections are made using the Options Wizard. To change a field’s value,
proceed as follows:
1. Select the field that you wish to modify using the Available Field
selection box. You can scroll through all available options.
2. Upon selection, the title below Available Field will change to the
parameter selected and the appropriate values will display in the
selection box.
3. Select All for all, Selected Only for an item that is highlighted in the
list or From to specify a range.
4. Click Update to implement the changes.
Note: The Settings box contains two buttons: Apply and Restore. Clicking
Apply will make the changes permanent. Clicking Restore will cancel the
changes that you have made and revert back to the original values. Once
you click Apply, you cannot restore the original values.