Vicon PILOT PLUS V1544, Инструкция по установке и эксплуатации

Страница: 62 / 142

Creating a Configuration
|
3-21
Pilot Plus XX200-00
Field Description
Alarm Monitor Selecting Enabled or Disabled will enable or disable
the monitor’s ability to display alarm video.
Default Action Selects the monitor’s state at system startup. Actions
are: None = no video; Camera = displays video from a
specified camera; Tour = begins a tour; Salvo =
displays video from a camera as defined in a salvo.
Default Callup # The Default Callup # is dependant on the Default
Action choice for this monitor. If the Default Action is
Camera, then Default Callup # = 1 means Camera # 1.
If the Default Action is Tour, then Default Callup # = 1
means Tour # 1. If the Default Action is Salvo, then
Default Callup # 1 means Salvo Switch # 1.
Sequence Alarm monitors may be set to sequence multiple
active alarm video or to display an alarm steadily until
acknowledged, in the order determined in Alarm Stack
Mode, Alarm Input Order or Alarm Order. The alarm
video will display for the length of time entered.
The dwell time must be long enough to allow the pan-
and-tilt drive to move to the preset position and be
viewed before the sequence proceeds to the next
alarm. Range = 3 – 120 sec. Set to Disabled to disable
this feature.
See Alarms section for more information.
Auto Ack Alarms may be acknowledged manually or
automatically. If a dwell time is entered, an alarm will
display until the acknowledge time passes, then the
alarm will be automatically acknowledged by the
system. Manual acknowledgment by a user is required
if this function is set to Disabled. Range = 3 – 120 sec.
Alarm Order Alarm order settings are FIFO and Priority. FIFO is
“first-in, first-out", signifying that the first alarm
activated will be the first alarm displayed on the alarm
monitor. Priority list alarms in the order of the priority
level.