Creating a Configuration
|
3-59
Pilot Plus
XX200-00
Field Description
Event #
This column will display the selected event number.
Salvo #
A predefined salvo that was set up with the Salvo
Switch screen. Refer to the
Video Switch Setup
section. 0 indicates no salvo.
Monitor #
A monitor from 1 – 8 that has been defined in the
system. 0 indicates no monitor.
Schedule Date
The date the event will take place or begin if event
will occur more than once. Date format is:
MM/DD/YYYY.
Schedule Hour
The hour of the day the event will take place. Hour
format is: 24-hour mode (0 – 23).
Schedule Minute
The minute the event will take place. Minute format
is: 0 – 59.
Frequency
The amount of times the event will occur. Values
are: Not Set, Once, Weekly, Daily, Monthly.
Day of Week
This field will automatically be populated
automatically based on the date, time and
frequency settings.
All selections are made using the Options Wizard. To change a field’s value,
proceed as follows:
1. Select the field that you wish to modify using the Available Field
selection box. You can scroll through all available options.
2. Upon selection, the title below Available Field will change to the
parameter selected and the appropriate values will display in the
selection box.
3. Select All for all, Selected Only for an item that is highlighted in the
list or From to specify a range.
4. Click Update to implement the changes.
Note:
The Settings box contains two buttons: Apply and Restore. Clicking
Apply will make the changes permanent. Clicking Restore will cancel the
changes that you have made and revert back to the original values. Once
you click Apply, you cannot restore the original values.
Содержание PILOT PLUS V1544
