Vicon PILOT PLUS V1544, Инструкция по установке и эксплуатации

Страница: 116 / 142

Creating a Configuration
|
3-75
Pilot Plus XX200-00
2. Click Camera Partition # in the 4-column table. The Options Wizard
fields will become active.
3. In Available Field, select View Camera to enable the cameras in the
partition to either be viewable or not.
4. In the Available Field, select Control PTZ to enable or disable PTZ
control of the cameras in the partition.
5. Select All to include all 128 cameras, Selected Only to include only
the current selection in the table, or From to specify a range of
cameras.
Note: If View Camera and Control PTZ are both set to Yes for the cameras
not selected, the actions assigned to the partition will have no effect on the
operator’s ability to view them or control PTZ during the timed event. The
cameras will be both viewable and controllable.
6. Click Update to implement the changes.
Note: The Settings box contains two buttons: Apply and Restore. Clicking
Apply will make the changes permanent. Clicking Restore will cancel the
changes that you have made and revert back to the original values. Once
you click Apply, you cannot restore the original values.