2-6
|
Chapter 2 Installation and Operation
XX-200-00
Pilot Plus
Connector or Control Description
Camera Inputs
BNC composite connectors for cameras 1 – 128.
The main panel contains connectors for cameras
1-32. Each panel on the expansion bay adds 32
more connectors per panel for additional camera
inputs up to 128. Terminate any unused BNC
connectors on the panel with a 75 ohm
termination.
AudioSwitch
Used to connect Vicon Relay/Audio-Follow-Video
switcher to Pilot Plus.
Alarm Inputs
Terminal block connectors use to connect up to 32
receiver or RS-232 alarms to system.
Alarm Relay Outputs
3-pin terminal block connector used to connect
external relays for control purposes.
Keypad Inputs
6-pin terminal block used to connect Vicon
V1300X series, V1411 or a host CPU to the
system.
Receiver Outputs
6-pin terminal block used to connect receivers or
dome controls to the system for PTZ control. The
main panel contains one terminal block for
receivers 1-32. Each panel on the expansion bay
contains one additional terminal block for
additional receiver outputs up to 128.
Monitor Outputs
BNC composite connectors for monitors 1 – 8.
Terminate any unused BNC connectors on the
panel with a 75 ohm termination.
PC Connectors
Connections for a VGA monitor, PS/2 keyboard
and mouse and 2 USB ports are provided on this
panel. The S-Video, RJ-45 LAN network connector
composite video, audio line out, audio line in and
microphone in are not used.
Host Computer
Interface
RS-232 serial connection port for Host Computer.
See Chapter 4 for pinout information.
Содержание PILOT PLUS V1544
