1
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-CDAU-01/04.qxd / 03.2019e / IL019101ZU / 136211185
© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Smart Dimming Actuator
CDAU-01/04, CDAU-01/04-I, CDAU-01/04-E, CDAU-01/05
OFF
868.3 MHz
IP20
R, L, C, LED, ESL
1.5 mm
2
10 mm
Local input
A
B
Program
Mode
Actuator
Type Load
CDAU-01/04
250 W
CDAU-01/04-I
Local input 250 W
CDAU-01/04-E
EMS, kWh 250 W
CDAU-01/05
100 W
Neutral wire needed!
Nuldraad benodigd!
Nøytralleder nødvendig
Neutralleiter erforderlich!
Nulový vodičzapotřebí!
Technical Data / Technische gegevens / Tekniske data /
Technische Daten / Technická data
Power supply
230 VAC +10% -15%, 50 Hz
Load
CDAU-01/04
0 - 250 W (0 - 250 VA),
LED, ESL: 0 - 100 W*
CDAU-01/05
0 - 100 W (0 - 100 VA),
LED, ESL: 0 - 100 W*
* Depending on the lamp type.
Power standby (Typical
325 mW (EMS type: 425 mW)
CDAU-01/05: 210 mW
EMS
0.5 W to 250 W, 5% ±0.5 W (>0.5 W)
CDAU-01/05: 0.5 W to 100 W
RF
868,3MHz (xComfort compatible)
Max RF power
25 mW (ERP)
Local Input
230 VAC (Max. 265 V)
Binary Input voltage
Maximum 265 V (Same phase)
Input contact resistance
< 10 k
Ω
reliably ON,
IN to L
> 50 k
Ω
reliably OFF
Voltage difference
< 1 V reliably ON
IN to L
> 3 V reliably OFF
Protection
Overload, Short-circuit (Auto recovery)
Dimensions
49.5 x 45.5 x 18 mm (H x W x D)
55°C
45°C
* Derating CDAU-01/04 (CDAU-01/05)
-5°C
250 (100) W
200 (80) W
Instruction Leaflet
Montageanweisung
Notice d’installation
Instrucciones de montaje
Istruzioni per il montaggio
Инструкция по монтажу
Montagehandleiding
Montagevejledning
Οδηγίες εγκατάστασης
Instruções de montagem
Monteringsanvisning
Asennusohje
Návod k montáži
Paigaldusjuhend
Szerelési utasítás
Montāžas instrukcija
Montavimo instrukcija
Instrukcja montażu
Navodila za montažo
Návod na montáž
Монтажни инструкции
Instrucţiuni de montaj
Upute za montažu
Kullanma Talimatı
Инструкција за монтажу
Intruksjonsblad
Монтажна інструкція
136211185_136211185 19.03.2019 08:09 Seite 1
