Vicon PILOT PLUS V1544, Инструкция по установке и эксплуатации

Страница: 17 / 142

1-6
|
Chapter 1 Introduction
XX200-00 Pilot Plus
Glossary
Term Description
Alarm Interface A device that senses a change in status from an alarm
input and communicates that information to the Pilot
Plus.
FIFO First In, First Out. Applicable to alarms and how they
are handled by the system.
Keypad Input device used to control cameras, monitors and
other system actions.
NTSC National Television System Committee video format
standard used in the United States and other Western
Hemisphere countries.
PAL Phase Alternating Line video format standard used in
many European countries.
Preset A set of programmed pan, tilt and/or zoom actions that
are executed by a single command.
Receiver A device used to communicate with PTZ cameras and
Pan and Tilt devices. PTZ dome cameras have built-in
receivers.
Salvo Simultaneous display of video from various camera
stations on various monitors.
Stack A list of active alarms.
Tour Series of preprogrammed video displays from various
camera stations on a monitor.
V-Sync Vertical synchronization refers generally to the
synchronization of frame changes with the vertical
blanking interval. One camera is set up as a reference
and all other cameras are synched to it so that all
vertical sync signals form all cameras are aligned.
When the V-Sync is set to On, the video will switch
during the vertical interval sp that picture roll will not
occur.