Vicon PILOT PLUS V1544, Инструкция по установке и эксплуатации

Страница: 14 / 142

General Information
|
1-3
Pilot Plus XX200-00
The Configurator provides an intuitive graphical user interface that enables
you to set up system parameters, such as:
ƒ
Timed or Triggered Event Programming
ƒ
Keypad Setup
ƒ
Receiver Profile Configuration
ƒ
Camera Setup
ƒ
Titling and Identification of Cameras, Monitors and Presets
ƒ
Monitor Setup
ƒ
Salvo and Tour Configuration
ƒ
Alarm Processing Configuration
The Pilot Plus has been configured with system defaults that should satisfy
most installations with no need for further customization. For many users, it
might not be necessary to modify the configuration with the Configurator.
Manual and sequential switching options are supported, including ascending
order and random order switching. Full camera-monitor partitioning and up to
32 timed events may be programmed. Default camera-monitor assignments
or a default tour may be programmed for power-on system startup after a
power outage.
Switching modes also include salvo or zone switching and sequencing
salvos, with up to eight camera-monitor pairs per salvo. These may be
selected manually or automatically. Salvos may be called up manually or by
alarm. Each salvo can have a unique combination of camera, monitor, and
preset position.
The Pilot Plus also provides touch-sensitive front panel controls with an
integral keypad and LCD display. Many common operations can be
performed using the front panel controls.
The Pilot Plus has three models, which
System Capabilities
The Pilot Plus supports the following:
ƒ
128 Cameras