Unitec Peco HF25A, Руководство пользователя

Страница: 35 / 177

CHAPTER 3: USING PROGRAMMING FUNCTIONS
HF25 DC RESISTANCE WELDING SYSTEM
990-333 3-7
8. RESET TO DEFAULTS
From the
MAIN MENU
, press the
7
key to go to
the
RESET TO DEFAULTS
menu, as shown at the
right. Through this menu, you may reset all
system programmed parameters and all weld
schedules to the original factory default settings
(see the table below).
<RESET TO DEFAULTS>
1. RESET SYSTEM PARAMETERS
2. RESET ALL SCHEDULES
EPROM DATE: XX-XX-XX XX:XX VX.XX
NUMBER Select, MENU Previous menu
Factory Default System Parameters
System Parameter Default Setting System Parameter Default Setting
Foot Switch Weld Abort ON End of Cycle Buzzer OFF
Switch Debounce Time 10 ms
Display Contrast 050% Relays 1 and 2 On When Alarm
Buzzer Loudness 050%
1. Reset System Parameters
1. With the reset to defaults screen
displayed, press the
1
key. This will
bring up the
RESET SYSTEM
PARAMETERS
query menu, as shown at
the right.
1. NO
2. YES
NUMBER Select, MENU Previous menu
2. Press the
2
key to select
YES
. This will automatically reset the system to the factory and
return the screen to the
RESET TO DEFAULTS
display.
2. Reset All Schedules
1. Press the
2
key. This will
automatically reset all weld schedule
parameters to the factory defaults and
return the screen to the
RESET TO
DEFAULTS
display.
2. Press the
MENU
key to return to the
MAIN MENU
screen.
<RESET ALL SCHEDULES?>
1. NO
2. YES
ALL WELD SCHEDULES ARE RESET
NUMBER Select, MENU Previous menu