Unitec Peco HF25A, Руководство пользователя

Страница: 30 / 177

CHAPTER 3: USING PROGRAMMING FUNCTIONS
HF25 DC RESISTANCE WELDING SYSTEM
3-2 990-333
2. WELD COUNTER
1. From the
MAIN MENU
, press the
2
key
to go to the
WELD COUNTERS
screen.
The total welds counter increments each
time a weld is made in any weld
schedule.
<WELD COUNTERS>
1. TOTAL WELDS : 0000000
2. OUT OF LIMITS HIGH : 000000
3. OUT LIMITS LOW : 000000
4. WITHIN LIMITS : 000000
NUMBER Select, MENU Previous menu
NOTE: The Control breaks down the weld count into three additional categories, as
determined by the energy limits monitor: rejects due to higher than programmed weld energy,
rejects due to lower than programmed weld energy, and the number of acceptable welds.
2. To select the weld counters, press the
1
,
2
,
3
or
4
key to select the desired weld counter.
The example to the right shows the
TOTAL WELDS
screen.
3. To reset the counter, press the
0
key.
4. To input a preset number, use the
numeric keys.
5. If you accidentally reset the wrong
counter, press the period (
. ) key. The
original count will reappear. Press the
MENU
key to return to the
MAIN MENU
screen.
WELD COUNTER>
1. TOTAL WELDS : 0017429
NUMBER Change, . Restore, MENU Menu
3. COPY A SCHEDULE
The Control can store
99
(numbered
1
through
99
) individual weld energy profiles. This
function allows you to copy any weld schedule
from one numbered weld schedule to another
numbered weld schedule
1. From the
MAIN MENU
, press the
3
key to
go to the
COPY SCHEDULE
screen.
COPY SCHEDULE
COPY SCHEDULE [ 1 ] TO SCHEDULE [2 ]
NUMBERS followed by SCHEDULE
2. Using the numeric keys, enter
1
in the
source schedule number field.
3. Press the
SCHEDULE
key to select the
destination schedule number field.
4. Using the numeric keys, enter
2
in the
destination schedule number field.
COPY SCHEDULE
COPY SCHEDULE [ 1 ] TO SCHEDULE [2 ]
NUMBERS followed by SCHEDULE
5. Press the
SCHEDULE
key to copy the schedule and exit the screen.
6. Press the
MENU
key to return to the main menu. The contents of Weld Schedule 1 will be
copied to Weld Schedule 2, overwriting the previous contents of Weld Schedule 2.