Unitec Peco HF25A, Руководство пользователя

Страница: 139 / 177

APPENDIX E. COMMUNICATIONS
HF25D LINEAR DC RESISTANCE WELDING CONTROL
E-10 990-333
Command RELAY {READ | SET} <crlf>
[ parameter_name value <crlf>]
<lf>
Control State Any except while welding
Description Provides control over the Control schedule parameters for relay settings. When used with the
"
READ " keyword, the relay settings of the currently loaded schedule are returned (see
RELAY under Control ORIGINATED COMMANDS). When the " SET " keyword is used,
the host may set (change) the value of one or more of the relay settings of the currently loaded
schedule. The following is a list of valid literal substitutions for the
parameter_name and
value variables:
ACTIVE1 { HIGH | LOW } Relay 1 Active High or Active Low
CONDITION1 condition_value Relay 1 Active Conditions
DISPCOND1 disp_condition_value Relay 1 Displacement.
ACTIVE2 { HIGH | LOW } Relay 2 Active High or Active Low
CONDITION2 condition_value Relay 2 Active Conditions
DISPCOND2 disp_condition_value Relay 2 Displacement.
ACTIVE3 { HIGH | LOW } Relay 3 Active High or Active Low
CONDITION3 condition_value Relay 3 Active Conditions
DISPCOND3 disp_condition_value Relay 3 Displacement.
ACTIVE4 { HIGH | LOW } Relay 4 Active High or Active Low
CONDITION4 condition_value Relay 4 Active Conditions
DISPCOND4 disp_condition_value Relay 4 Displacement.
condition_value is: { WELD | END | ALARM |
LIMITS | P1HI | P1LOW | P2HI |
P2LOW | DISP }
disp_condition_value is: { ANY | ILO | IHI | FLO | FHI |
DLO | DHI | INI | DSP | SEA }
NOTE:
disp_condition_value not valid unless condition_value is DISP (displacement).
disp_condition_value explanations:
ANY Any displacement error
ILO , IHI Initial thickness low/hi error
FLO , FHI Final thickness low/hi error
DLO , DHI Final displacement low/hi error
INI Any initial error
DSP Any final displacement error
SEA
Stop energy at error