Unitec Peco HF25A, Руководство пользователя

Страница: 146 / 177

APPENDIX E. COMMUNICATIONS
HF25D LINEAR DC RESISTANCE WELDING CONTROL
990-333 E-17
Description
(Continued)
average_current_2: The average current of pulse 2 (in A).
average_voltage_2: The average voltage of pulse 2(in mV).
peak_current_2: The peak current of pulse 2 (in A).
peak_voltage_2: The peak voltage of pulse 2 (in mV).
average_power_2: The average power of pulse 2 (in W).
peak_power_2: The peak power of pulse 2 (in W).
average_resistance_2: The average resistance of pulse 2 (in 10
-5 Ω
).
peak_resistance_2: The peak resistance of pulse 2 (in 10
-5 Ω
).
%_control_2: The percent of capacity control needed to reach pulse 2.
null_2: Always zero
disp_units: Displacement measurement units ( 0 = inches/1000, 1 =
mm)
disp_initial: Displacement initial thickness value
disp_final: Displacement final thickness value
disp_displacement: Displacement value (initial minus final)
monitor_limit: Monitor Limit Time Reached in msec .
sea_reached: Stop Energy At Limit Reached (0=False, 1=True)
sea_time: Stop Energy At Limit Time in msec.
NOTE:
disp_xxxx values are signed integer values that have units that depend on disp_units as
follows:
units = 0 = inches/1000:
1 = 0.001 inches; 10 = 0.01 inches
units = 1 = mm: 1 = 0.01 mm, 10 = 0.10 mm
Command STATE state_name <crlf><lf>
Control State Any
Description
Identifies the current state of operation of the Control. May be in response to the STATE
READ Command sent by the host, or may be sent as a result of a state change from the
Control front panel.
state_name may be " RUN”, " MENU " or “ MONITOR ”.
Command COUNTER number <crlf><lf>
Control State Any
Description Returns the requested current Control weld counter number.