Telstra Commander i, Руководство по обслуживанию

Страница: 63 / 195

Programming
Page 4-6
04: Administration Programming
The following procedures are to be undertaken by the System
Administrator, as access is only made available upon entry of the
administration password. For full details on Administration
Programming please refer to the System User Guide.
To Gain Access to the Administration Sub Menus:
•
Press [i].
•
Dial the four digit Administration password and press [i]. The first
sub menu is displayed.
If the password is incorrect, the Admin menu is displayed. Press [i]
and re-enter the correct password or press [RLS] to exit.
•
To scroll up and down the sub menus use the [*] and [#] keys.
Alternatively, dial the sub menu number.
01a Set Time
The Default setting is: Clear
•
Press [i] to display the > prompt.
•
Dial the time in twenty-four hour format, using four digits (two for
the hour followed by two for the minutes).
•
Press [i] to confirm the new time.
02a System Speed
Dial
The Default setting is: Clear
A maximum of twenty system speed dial telephone numbers may be
stored. These can be accessed by any station.
•
Press [i] and the first stored number is displayed.
•
Select the desired location (11 - 30) by dialling the number or by
using the [*] and [#] keys to scroll backwards and forwards.
•
Press [i] to display the > prompt.
•
Dial the number to be stored and press [i] to confirm.
A pause can be stored by pressing [REDIAL].
A hookflash can be stored by pressing [RECALL].