Telstra Commander i, Руководство по обслуживанию

Страница: 150 / 195

How To Use The AFU
Commander i+ AFU User Guide - Issue 2
To Resume an External Call that is On Hold:
•
Pick up the handset.
•
Wait for the internal dial tone.
•
Dial 1.
If more than one call is on hold then the call on the highest number line is
retrieved first. That is, a held call on line 4 will be retrieved first before a held
call on line 2.
During Night Status, you can resume any call placed in Common Hold. In
Day Status, you can only resume a call put in Common Hold by yourself.
To Transfer an External Call:
This procedure is for when you are talking to an external party and wish to
transfer the call to another station.
•
Press the [RECALL] or ‘Flash’ key.
•
Wait for the internal dial tone.
•
Dial 2, dial 4 and then dial the station number.
•
Replace the handset before the called station answers if you wish to
transfer ‘without announcement’
or
Wait for the answer, offer the call, and replace the handset to transfer
‘with announcement’.
•
If the called extension does not accept the call, press the [RECALL] or
‘Flash’ key to resume the outside call.
•
If the operator of the called extension replaces the handset, the external
communication is automatically restored.
If the called station does not answer the transferred call within the pre-
programmed time, the call will revert back to your phone.
Speed Dialling
You can dial on both direct external and PABX lines, a repertory number
stored in the System Speed Dial (numbered from 11 to 30).
Note: System Speed Dial is not subject to Station Class Of Service
Barring.
To Use System Speed Dialling on an External Line:
•
Lift the handset and wait until you hear the internal dial tone
•
Dial 7 followed by 0, and wait for the external dial tone
•
Dial the desired speed dial address (11 - 30).
To Use Speed Dialling on a PABX Line:
•
Lift the handset and wait until you hear the internal dial tone
•
Dial 7 followed by 8, and wait for the external dial tone
•
Dial the desired speed dial address (11 - 30).
A pause of three seconds is automatically inserted between the PABX access
digit (normally 0) and the outside number.
If the System Speed Dial number is not compatible with the line selected (eg.
a PABX only number to an external line) or where there is no available line,
you will hear a busy tone.
Access to Network / PABX Services(Call Waiting or Call
Transfer)
When using Network or PABX Services you will need to send a timed loop
break/ hookflash to the external line.
•
Press the [RECALL] or ‘Flash’ key
•
Wait for the internal dial tone
•
Dial #
Page 2-4 Page 2-5